Outline

0The TCM-100 series is a smart multi-function temperature regulator with lovely and clean front appearance of which the user-friendliness and operational convenience are emphasized by adopting large LCD and buttons. It can be more conveniently used when several units are connected through communication rather than when a unit is individually used as wireless or wire/wireless communication is supported.
0The TCM-100 series is divided into several models depending on the purpose of use (fan coil control, floor heating control, or temperature monitoring) and mounting method (wall mount type, or buried box type), and the functions can be differently used by simply setting the DIP switch.
0Also, the parameters of each model can be easily set using the embedded LCD and keys, and the set content can be permanently used being stored in EEPROM.

Functions and features

• Fan coil control unit (model: TCM-100FM/FS)
  • It supports AUTO mode in which the air volume of the fan coil is automatically adjusted in accordance with the temperature measured by the embedded temperature sensor and manual mode of STRONG, MEDIUM, LIGHT and OFF. It controls the fan coil valve depending on the mode (cooling or heating) and the set temperature, and supports wire communication and wireless communication (IEEE802.15.4) at the same time.
• Floor heating control unit (model: TCM-100HW/HB)
  • An external temperature sensor for floor heating or the embedded indoor temperature sensor can be selectively used, and a 20 A large capacity relay is used to control the temperature to control the directly connected heating load.
• Wireless temperature and humidity monitoring and control unit (model: TCM-100BS/BL)
  • It is used for existing buildings for which monitoring of temperature and humidity is required to be carried out without adding any piping or wiring. It is driven by general batteries, and the pack is divided into the standard model (BS: AAAx2) and large capacity model (BL: AAAx10). The periodic transmission time can be set in the unit of 10 seconds, and it saves power by automatically returning to sleep mode after transmission. (If the transmission cycle of the large capacity model is set to 1 minute, it can be used for about 1 year.)
• Universal indoor temperature/humidity sensor (model: TCM-100S)
  • It outputs the measured indoor temperature and humidity values after converting them into industrial standard signals between 4 and 20 mA respectively, and the temperature and humidity are transmitted via Modbus RTU, an industrial standard protocol, at the same time.
• Common function of modules
  • Temperature display (all models), and humidity display (TCM-100S, and TCM-100B)
    Automatic backlight operation when the screen is touched, and the function to set the backlight operation depending on the operation condition (TCM-100F, -100H, and -100S)
    Wire communication: IEEE802.15.4 (all models), and wireless communication: RS 485 (TCM-100F, -100H, and -100S)